Description
USBHub3+ is a 9-port, software controlled, programmable USB hub with per-port power control designed for the most demanding industrial and business environments. Ideal for conference rooms, testing or development environments where standard “always-on” behavior of a consumer-grade USB hub is not desirable. Expand to multiple hubs via expansion port.
POWERFUL AND FULL OF POWER
While most USB hubs struggle to charge a phone, this programmable USB Hub can supply up to 5A on all ports with a maximum total power of up to 70W. This hub will not even break a sweat with eight 4k cameras connected.
The USBHub3+ is DIN Rail mountable using the C31-DINM-1.
Features
- Supports USB hosts and devices up to USB 5Gbps; backwards compatible with USB1, USB2
- Individually enable/disable any of 8 downstream ports
- Measure voltage and current on each downstream port
- Hi-Speed data, SuperSpeed data and power lines can be separately enabled for each downstream port
- Set programmable current limits for each downstream port (up to 4A)
- Dedicated Control Port for software control; independent of the selected upstream port
- Select between two (2) host connections
- All ports support USB link speeds up to 5Gbps
- Detect established link speed on each port: SuperSpeed (5Gbps) or Hi-Speed (480Mbps)
- Supply up to 5A per port; measure upto 4A
- Set enumeration delay for discovery of attached downstream devices
- Backward compatible with USB 2.0 and USB 1.x devices
- Boost USB 2.0 upstream and downstream signal levels
- DIN-rail mountable
- Alternate Euro-style terminal block power input connector
- Certified to +/-15kV ESD strikes (IEC61000-4-2 level 4)
- Overvoltage and reverse current protected Vbus outputs
- Monitor voltage and current on any/all ports
- Maintain selectable control of data, SS lines, power lines for any port
- Enable/Disable any downstream port
Applications
USES FOR 8-PORT INTELLIGENT USB HUB
- USB device manufacturing
- USB device validation and development
- Plug/unplug cycle testing
- Functional testing
- Battery charging
- USB device resets
- Power and data speed analyzing
- Controlling USB device enumeration sequence
Specifications
Specifications are valid at 25°C unless otherwise noted. Indoor application use only. Sample rates are typically limited by the USB throughput of the host operating system except where bulk capture is supported.
| Parameter | Conditions/Notes | Min | Typ. | Max | Units |
|---|---|---|---|---|---|
| Input Power, Wsupply, no downstream devices attached | – | 2.2 | – | W | |
| Vsupply Under Voltage Lockout (UVLO) | 7.7 | 8.0 | 8.2 | V | |
| Vsupply Over Voltage Lockout (OVLO) | 26.0 | 26.8 | 27.8 | V | |
| Wide Input Range System Efficiency | At 12.0V input, nominal 8A load3 | 84 | – | 92 | % |
| USB Downstream Output Voltage, Vbus | No load on downstream USB ports | 4.947 | -5.10 | 5.25 | V |
| Vbus Measurement Resolution | – | 8.0 | – | mV | |
| Vbus Measurement Accuracy | -2.0 | – | 2.0 | % | |
| Vbus Short-circuit Trip Current, Ilimit | 4.8 | 5.0 | 5.4 | A | |
| Vbus Short-circuit Trip Time, tlimit | – | 0.7 | – | µS | |
| Vbus Short-circuit Average Current, Ishort | After trip | 0.3 | 0.5 | 52.0 | A |
| Vbus Current Measurement Resolution | – | 1.0 | – | mA | |
| Vbus Current Measurement Accuracy | Vbus current < 4.00A | -1.0 | – | 1.0 | % |
| Vbus Current Measurement Range | 0 | – | 4095 | mA | |
| Vbus Current Limit Trip Point Range | Software programmable | 0 | – | 4095 | mA |
| Vbus Current Limit Trip Point Resolution | – | 1.0 | – | mA | |
| USB3 SuperSpeed Data Throughput | 5.0 | Gbps | |||
| USB2 HighSpeed Data Throughput | 480 | Mbps | |||
| MTBF (hub assembly only) | 92.8 | Years | |||
| FIT (60% confidence; hub assembly) | 1230 | failures per one billion hours | |||
| MTBF (hub plus included power adapter) | 5.3 | Years | |||
| FIT (60% confidence; hub plus power adapter) | 21229 | failures per one billion hours |
Buyer Notice
1. About the product
Due to market fluctuations, exchange rate changes, and other factors, product prices and product attributes are for reference only; The specific product requirements are subject to customer requirements, and the price is based on the communicated quotation. All product prices on this website are not considered transaction prices and are for reference only!
2. About Trademark Copyright
All company names, trademarks, logos, product images, product descriptions, product brand names, and trademark copyrights related to this website belong to the corresponding brands; This website is only designed for the convenience of product identification.
Please carefully read the buyer’s instructions to avoid unnecessary disputes.
English 
Русский 
日本語 
简体中文
Reviews
There are no reviews yet.