DUNIWAY IPC-0062 Ion Pump Controller in the United States

Description

Medium (8, 20, 30, 60 l/s) Ion Pump Control/Display, Half 19″ Rack Package, Output: +3300 & -5200 volts, 200 mA. Input: 120/240 VAC

DUNIWAY IPC-0062 Ion Pump Controller in the United States
input parameter
Voltage 115/230 VAC, single-phase, 50/60 Hz, with
Internal tap for voltage variation.
The maximum current in START mode is 10 amperes (115VAC).
Maximum 5 Amps (230VAC) in Start Mode
Output parameters
Open circuit voltage+/-5200+/-10% VDC or
+/-3300+/-10% VDC
Internal tap for voltage variation,
And polarity selection on the rear panel.
Short circuit current for 60 Hz operation:+/-200 mA+/-10% or
+/-120 mA+/-10%
For 50 Hz operation:+/-167 mA+/-10% or
+/-100 mA+/-10%
Line power overload protection fuse. Automatic power off
If the pressure is greater than approximately 0.5 millitorr and
The START/PROTECT switch is in the protected position.
Switching current of 8, 20, or 30 liters per second+/-65 mA+/-20%
Position, or:
+/-108 mA+/-20%, 60 liters per second
position
Measuring 20 microamps+/-2% tension belt gauge
Current range is 200 mA to 20 microA,+/-10% in
5 scale positions
Logarithmic scale for pressure scale modification, 10-4 to 10-8 torr, and
Switch the selected pump.
Voltage level 0-6KV

Buyer Notice
1. About the product
Due to market fluctuations, exchange rate changes, and other factors, product prices and product attributes are for reference only; The specific product requirements are subject to customer requirements, and the price is based on the communicated quotation. All product prices on this website are not considered transaction prices and are for reference only!
2. About Trademark Copyright
All company names, trademarks, logos, product images, product descriptions, product brand names, and trademark copyrights related to this website belong to the corresponding brands; This website is only designed for the convenience of product identification.
Please carefully read the buyer’s instructions to avoid unnecessary disputes.