FWT “CYPHER” SURVEY METER 5000

Description

The “Cypher” is an advanced survey instrument. It is very user friendly and uses digital technology to greatly enhance its operation. It works with most GM, proportional, and scintillator probes and displays the information on a backlit alphanumeric LCD. The display has a moving pointer bargraph that closely approximates a meter movement. It is smooth, easy to read and accurate. The digital level and the bargraph scale are also shown on the display.

The instrument has many different modes including rate, integrate, and scaler. Each mode is independently programmable and may be turned off. It can be set up as a simple ratemeter with only one mode or it can be set up for all 6 modes. Thus it can be easily adjusted to suit your application. If that application changes it is easy to reconfigure for a new one. This instrument helps you get the readings you want. It is difficult to misread the data with the units and range information shown right on the display.

The 4 soft-key buttons on the front panel operate the instrument. The two on the right are user defined. One user may want to use them for light and beeper while another may want to use them for range hold and reset. The soft-keys also help to simplify the operation of the instrument. There is only one level of display; you are never lost in a maze of menus.

The digital nature of the instrument means that setup, calibration and maintenance are greatly simplified. Many of the operational and calibration functions can be controlled or set from either the front panel or the inside panel or both. The accuracy of the data is assured by a crystal controlled timebase and the switchable deadtime correction extends the linear range of most probes.

The “Cypher” survey instrument is small, rugged, and light. It is simple to operate, loaded with features and programmable for either simple or advanced uses. It is the perfect all around instrument.

Mechanical
 Size overall: 7.5 in. (19 cm) L x 4.2 in. (10.7 cm) W x 4.45 in. (11.3 cm) H w/o probe holder. Gasketed splashproof aluminum enclosure. Top panel is milled and anodized with nonerasable nomenclature. Bottom painted. LCD window is acrylic.
 Weight: 2.25 lb. (1 kg) with batteries.
 External controls: 4 pushbuttons (Power, Mode, *, and  ). Power button when held down for 5 seconds resets the microprocessor.
 Internal controls: 1 pushbutton for entry into calibrate mode.
 Internal construction: Circuit board hinges for easy access. Batteries are mounted on an aluminum panel in nylon holders. ICs are socketed. All components are standard types.
 Probe clip: For 1″ Dia handle. Others sizes available.

Buyer Notice

1. About the product

Due to market fluctuations, exchange rate changes, and other factors, product prices and product attributes are for reference only; The specific product requirements are subject to customer requirements, and the prices are subject to communication and quotation. All product prices on this website are not considered transaction prices and are for reference only!

2. Regarding trademark copyright

All company names, trademarks, logos, product images, product descriptions, product brand names, etc. related to this website, and all intellectual property rights such as trademark copyright belong to the corresponding brand; This website is only for the convenience of product identification.
Please carefully read the buyer’s instructions to avoid unnecessary disputes.