HI-Q Air Flow Calibrator HFC

Description

The HFC-Series, HI-Volume Air Flow Calibrators, have eliminated the need for cumbersome orifice plates and water manometers. The HFC-XXC series units utilize a precision machined Venturi tube coupled with a pressure differential gauge giving a direct reading in the volumetric units of your choice (i.e. SCFM @ stp) . The unit is calibrated against an in-line N.I.S.T. traceable laminar flow element. The primary calibrator meets the requirements of MIL Std. 45662A. HFC-XX series units are intended to be used open to air.

The direct meter read-out will indicate the flow in standard CFM, LPM, or CMM at standard conditions (29.92” of Hg and 70º F). Given actual sampling temperature & barometric pressure during calibration, a technician can convert actual flow readings (i.e. ACFM) to standard units (i.e. SCFM) by making a simple calculation using look-up correction factors from tables given in the operating manual.

Depending on orientation at calibration (vertical vs. horizontal), HI-Q offers two HFC models: The HFC-XX is intended for high flow calibrations in the vertical plane, such as seen with the “HVP” style high volume air samplers. Whereas HI-Q’s HFC-SIDE-XX is intended for the calibration of low to high flow rates in the horizontal plane, such as seen with HI-Q’s line of portable continuous duty and grab air samplers.

The HFC-XX series units have a standard 1½” male straight pipe thread (MSPT) which can be screw into most low to medium volume air sampling pumps (ie: HI-Q’s, CF-1001 or CF-901 ). On higher volumetric flow samplers, a user must incorporate an adapter plate. With the use of HI-Q’s FHA-4CF 4” diameter adapter disc, an operator is able to calibrate a unit with a 4” diameter filter holder assembly. The FHA-810CF adapter plate is used to calibrate units with an 8” x 10” paper holder.

Buyer Notice

1. About the product

Due to market fluctuations, exchange rate changes, and other factors, product prices and product attributes are for reference only; The specific product requirements are subject to customer requirements, and the prices are subject to communication and quotation. All product prices on this website are not considered transaction prices and are for reference only!

2. Regarding trademark copyright

All company names, trademarks, logos, product images, product descriptions, product brand names, etc. related to this website, and all intellectual property rights such as trademark copyright belong to the corresponding brand; This website is only for the convenience of product identification.
Please carefully read the buyer’s instructions to avoid unnecessary disputes.