MesaLabs Non-destructive Cap Torque Tester Torqo 1600

• Accurate & repeatable results 
• Reduce product & packaging waste 
• Perform non-destructive & destructive testing 
• Improve worker safety 
• Calibrate in the field 
• Variable speed motor available 
• Wide range of accessories 

Testing Capabilities

• Removal Torque: With a single keystroke, the cap can be removed and reapplied to a designated torque level. The measured values can be stored in the analyzer’s memory. 
• Incremental Torque: The proper installation of a cap with an internal seal can be verified with this test. 
• Bridge Torque: This test determines the rotational force required to break the bands that bridge the gap between the cap and the tamper evident band on either an aluminum roll-on cap or a plastic cap. 
• Reverse Ratchet Torque: This measures the torque required to rotate a child-resistant cap in its free running state. 
• ROPP (Roll on Pilfer Proof): This test is designed to measure the torque required to open, break the bridges and then strip the threads on a Roll on Pilfer Proof cap. 
• Close: This selection enables the system to be used as a capping device. When used in this mode the actual closing value can be saved and outputted. 
• Strip: The strip test is designed to measure the torque required to drive the cap in a clockwise direction (close) in order to break the tamper evident band and remove the cap completely from the product. 

Technical Specifications

• Length: 18 in. (45cm) 
• Width: 13.8 in. (35 cm) 
• Height: 32 in. (82 cm) 32 in. 
• Weight: 160 lbs (Ship wt.) 
• Torque Range In-Lb (N-m): 5 – 200 in-lbs 
• Accuracy: +/- 0.125% FS on 5-20 in-lbs models, +/- 0.5% FS on 30-200 in-lbs models 
• Resolution: 1:1000 
• Speed Range: 1 RPM (1-8 RPM w/ multi-speed option) 
• Input/Outputs: RS-232 Cable, USB, Ethernet 
• Voltage: 100/240 VAC, 50/60 Hz 
• Amperage: 2.0A max 
• Operation Humidity: up to 90% (non-condensing) 
• Operation Temperature: 32-100°F (0 – 40°C) 
• CE Certification: Yes 

Buyer Notice

1. About the product

Due to market fluctuations, exchange rate changes, and other factors, product prices and product attributes are for reference only; The specific product requirements are subject to customer requirements, and the prices are subject to communication and quotation. All product prices on this website are not considered transaction prices and are for reference only!

2. Regarding trademark copyright

All company names, trademarks, logos, product images, product descriptions, product brand names, etc. related to this website, and all intellectual property rights such as trademark copyright belong to the corresponding brand; This website is only for the convenience of product identification.
Please carefully read the buyer’s instructions to avoid unnecessary disputes.