Phymetrix Loop powered Moisture Analyzer Model PLMa

Brand:Phymetrix
Model:PLMa
If you want to learn about the product, please contact us.
Please provide the brand, model, and quantity for inquiry.

Category:

Description

Multifunctional Multi-Purpose Cost Effective
easy-to-use dew point sensor, dew point probe

  • -110°C to +20°C dew point Sensor
  • Fast, Accurate and Repeatable
  • Small & Lightweight
  • State-of-the-art electronics & software
  • 316 Stainless Steel & PTFE wetted parts
  • NIST calibrations
  • Stainless Steel IP68 housing
  • Protection from reversed polarity
  • Robust Industrial M12 connector, IP68 protection
  • 3/4″-16 process interface threads with Viton O-ring as well as a 1/4″ NPT threads
  • Interfaces to a variety of panel meters DD4 and DD5
  • Molded IP67 cables available for harsh environment
  • Units of measure: °C & °F dewpoint, ppmV, ppmW,
    µB H2O vapor pressure, grams of H2O / m3,
    Lbs H2O /106 standard cubic feet in Natural Gas.
  • 4/20 mA Loop Powered
  • Wide loop voltage range 5VDC to 28VDC
  • Built-in digital I/O for controlling relays
  • Built-in temperature compensation
  • Built-in self-test and diagnostics
  • HART interface compliant

Technical Specifications

Moisture Sensor
(dew point sensor)
  • Range: -110°C to +20°C dewpoint ( -166°F to +68°F dewpoint )
  • Accuracy: ±2°C temperature corrected
  • Repeatability: 0.8°C
  • Response time: 95% of step change in 3 min.
  • Sample flow: >1 LPM
Temperature Sensor
  • Range:  -40°C to +70°C
  • Accuracy:  ±2°C
Ergonomics
  • Easy and quick installation, no tools required
Electrical
  • 5VDC to 28VDC two wire loop operation 4mA to 20mA
  • Housing isolated from 4-20mA Loop
  • Measurement resolution of moisture sensor: 1pF resulting in less than 0.01 ̊C
  • 5 pin M12 industrial connector IP68 when mating connector fully engaged
  • Mating connectors with molded cables approved for Hazardous Location use available
  • Two conductor cable min. 24AWG (for total cable length >1mile min. 20AWG) To meet CE requirements cable must be shielded.
  • Built-in digital I/O for optionally controlling relays
Mechanical
  • All 316 Stainless Steel and PTFE wetted parts for fast response time.
  • Enclosure all stainless steel construction IP67 protection when installed
  • Dimensions (overall) including connector- L: 3.25″ (82.6mm) Dia: 1.62″ (41.3mm)
  • Process threads 3/4″-16 and 14mm x 1.25mm Oring-Seal and 1/4″NPT, can install with either threads
  • Weight Total: 6 oz (0.17 Kg)
  • Pressure: 5000 PSIA (345 Bar)
Temperature Range
  • PLMa Analyzer: -20°C to +60°C
  • Electronics: -40°C to +85°C
  • Moisture Sensor: -20°C to +60°C
Miscellaneous Features
  • NIST traceable calibrations
  • Units of measure: °C & °F dewpoint, ppmV, ppmW, µB H2O vapor pressure, grams of H2O / m3,
    Lbs H2O /106 standard cubic feet in Natural Gas.
  • Digital & Analog: Two Wire 4/20mA loop with HART®
  • Transmitter stores all HART setup

 

 

 

Buyer Notice
1. About the product
Due to market fluctuations, exchange rate changes, and other factors, product prices and product attributes are for reference only; The specific product requirements are subject to customer requirements, and the price is based on the communicated quotation. All product prices on this website are not considered transaction prices and are for reference only!
2. About Trademark Copyright
All company names, trademarks, logos, product images, product descriptions, product brand names, and trademark copyrights related to this website belong to the corresponding brands; This website is only designed for the convenience of product identification.
Please carefully read the buyer’s instructions to avoid unnecessary disputes.

Reviews

There are no reviews yet.

Be the first to review “Phymetrix Loop powered Moisture Analyzer Model PLMa”

Related products