Signal craft 26 GHz Frequency Converter SC2426

Description

Power is provided via a 12-volt wall cube which is included with the Development Kit. An embedded fan and temperature monitoring are integrated into the unit to manage heat.

Control of the module is provided via the USB, UART, or SPI interfaces. Most users will find it convenient to control the module using the console interface over USB. Alternatively, embedded controllers may access the UART or SPI interfaces available on the external Control Ports.

Two API protocols are available. The first is ASCII-based, and its commands follow the SCPI structure as defined in IEEE 488.2. The second is a binary protocol, targeted at embedded control applications where speed and timing are critical. Both protocols are detailed in an API Specification.

Up to 4 units can be combined in a vertical stack to create a complex 4 x 4 MIMO radio system. In this scenario, the internal control buses are routed to the cascaded modules over the Expansion Port. In this manner, API commands sent on the primary unit, can be redirected to the downstream modules. This eliminates the need for multiple controllers and simplifies timing and synchronization between units. Module addresses are set using a DIP switch on the Configuration Port.

Secondary and External Control Ports are also available. These ports expose Power, SPI, I2C, UART and GPIO that provide users with a convenient method of interfacing to external front-end modules, such as integrated antenna arrays or switched filter banks.

Typical Applications

• 5G FR3 Research and Development
• Aerospace and Defense Application Prototyping
• Software Defined Radio Applications
• Advanced Wireless Communications Research

Buyer Notice

1. About the product

Due to market fluctuations, exchange rate changes, and other factors, product prices and product attributes are for reference only; The specific product requirements are subject to customer requirements, and the prices are subject to communication and quotation. All product prices on this website are not considered transaction prices and are for reference only!

2. Regarding trademark copyright

All company names, trademarks, logos, product images, product descriptions, product brand names, etc. related to this website, and all intellectual property rights such as trademark copyright belong to the corresponding brand; This website is only for the convenience of product identification.
Please carefully read the buyer’s instructions to avoid unnecessary disputes.