TECPRO Loudspeaker station LS371

Description

This has a 70mm x 40mm loudspeaker and a flush mounted electret microphone. All components are mounted on a single machined aluminium plate designed to fit a standard UK domestic flush back-box of the type typically used for cooker-switch units (27-379 Tecpro LS379FB flush-mounting back box for LS371). Suitable M5 screws are supplied for attaching the aluminium front plate. Spares are available (14-355).

Cable entry is through the standard knock-out on the back-box rear or side face and termination is via an internal junction-block. The LS371 derives its power directly from the 24V DC Tecpro line. A green LED indicates power is present. Installers should note that the back-box must be turned through 90 degrees from its more usual orientation. A template is provided to aid fitting. Dimensions: 180 x 170 x 57 (l x w x h) mm. Weight: 950g.

Series 2 Tecpro LS300 Loudspeaker Stations provide local monitoring of intercom circuits without the need to wear headphones. The built-in microphone makes them suitable for hands-free operation, allowing full-duplex simultaneous talk and listen conversations to take place. If required, a headset may be plugged in, disabling the internal microphone and speaker. LS300 Loudspeaker Stations offer single circuit operation as standard. Dual circuit versions are available on some models.

• Hands-free or headset operation
• Loudspeakers selected for clear voice reproduction
• Built-in flush-mounted electret microphone
• Microphone On/Off button offers push-to-talk or latching characteristics
• Acoustic feedback cancellation preset
• Side-tone preset for headset
• XLR 4-pin input socket for gooseneck microphone or headset
• Single and dual-circuit versions available on some models
• DC and 20kHz ‘Call Alert’ signaling send and receive
• 24kHz ‘Remote Mic Kill’ send and receive
• 28kHz ‘Override’ signal recognition for preset volume restoration

More model:LS351   LS361   LS352   LS372   LS381   LS382

Buyer Notice

1. About the product

Due to market fluctuations, exchange rate changes, and other factors, product prices and product attributes are for reference only; The specific product requirements are subject to customer requirements, and the prices are subject to communication and quotation. All product prices on this website are not considered transaction prices and are for reference only!

2. Regarding trademark copyright

All company names, trademarks, logos, product images, product descriptions, product brand names, etc. related to this website, and all intellectual property rights such as trademark copyright belong to the corresponding brand; This website is only for the convenience of product identification.
Please carefully read the buyer’s instructions to avoid unnecessary disputes.