HOYTMETER Insulation & Multifunction Tester (OLED) 1155TMF-M

ブランド：HOYTMETER
Model:1155TMF-M
製品についてお知りになりたい方は、当社までご連絡ください。
お問い合わせの際は、ブランド、モデル、数量をお知らせください。

カテゴリー:

説明

1155 TMF-M Insulation & Multifunction Tester (OLED Display)
Electrical / Installations / Telecoms / Maintenance / Analysis

特徴

● High Contrast OLED display.
● Designed for viewing in the dark, for mining industry.
● Auto-range microprocessor-controlled.
● Automatic voltmeter AC/DC at Start/Reset.
● Battery test at switch ON/Reset.
● Safety voltmeter before each test.
● Auto-discharge on all tests and all ranges.
● Leads auto-null key.
● Test auto-stop.
● Smart hold and stop on voltmeter AC/DC.
● Ener-Save.
● Continuity short circuit >220mA.
● Continuity open circuit voltage of 5Vdc.
● Nominal voltage @ 1mA on all insulation ranges.
● Polarization index (PI).
● Dielectric Absorption Ratio (DAR).
● BS 16 edition.

Special Functions

● DAR (Dielectric Absorption Ratio)
The Dielectric Absorption Ratio is the ratio of the insulation resistance measured at 1 minute divided by the insulation resistance measured at 30 seconds. Thirty seconds after starting a test (with Ener-SaveTM disabled), the tester will beep,indicating that the resistance value measured at 30 seconds has been saved. One minute after starting a test, the tester will beep again, indicating that the DAR result has been computed. The display format then changes to display the DAR result.
● PI (Polarization Index)
The Polarization Index is the ratio of the insulation resistance measured at 10 minutes divided by the insulation resistance measured at 1 minute. One minute after starting a test, the resistance value is saved and the DAR is displayed. The test then continues, and after 10 minutes (with Ener-SaveTM disabled), the tester will beep again, indicating that the PI result has been computed. The display format changes to display the PI result. The tester will AutoStop at 10 minutes.
● Voltmeter
When testing insulation resistance while there is a presence of voltage (whether ACV or DCV) on the measured object, conventional insulation testers are highly susceptible to damage. With this new line of insulation testers, it has the ability to switch to voltage detection mode without damaging the once it detects the presence of voltage. It will also display the voltage finding on the OLED display screen. With this new and unique function, it will allow the user to safely rule out the possibility of any presence of voltage on the measured object prior to measuring its insulation.
● MOV and Gas Arrester Testing
Most equipments and electrical installations are protected by MOVs and Gas arresters. They can test these devices to establish if the devices are still operating correctly or not. Energy conservation is featured on all these new Advanced Products.

仕様

  • 絶縁抵抗
    – Test voltage: 50V; 100V; 125V; 250V; 500V; 1000V.
    – Measuring ranges: 0.1MΩ~400MΩ; 0.1MΩ~800MΩ; 0.1MΩ~1GΩ; 0.2M~2GΩ; 0.2M~4GΩ; 0.2M~8GΩ.
    – Accuracy: 0.1MΩ~4GΩ: ±3%rdg; 4GΩ~8GΩ: ±5%rdg.
    – Polarization index (PI).
    – Dielectric Absorption Ratio (DAR).
  • MOVs & GAS Voltage Result @ 1mA.
    – Test Voltage: 5~1020V.
    – Accuracy: ±3%rdg ±2dgt.
  • Continuity short circuit > 220mA
    – Range: 0.01~100Ω; 100~300Ω; 300~1999Ω.
    – Accuracy: ±1%rdg; ±1.5%rdg; ±2%rdg.
    – Auto-Null Up to 5Ω.
    – Buzzer Threshold Value Up to 3Ω.
  • Voltmeter (Autoranging)
    – Range: 0~700Vac; 0~950Vdc.
    – Accuracy: ±1.5% F.S.
    – Resolution: ±1V.
    – Auto-Hold.
  • Battery load current: Approx. 300mA.
  • LCD type: Large Type 2 × 16 Characters.
  • Auto-off: Approx. 5 minutes.
  • Fuse: Fast HBC 500mA 600V (5 × 20mm).
  • Operating temperature: 0°C~40°C not in full sun.
  • Storage temperature: -10°C~50°C.
  • Dimensions: 175(L) × 85(W) × 75(D)mm.
  • Weight (battery included): Approx. 655g.
  • Power source: 1.5V (AA) × 8 Alkaline batteries.
  • Safety Standard: EN 61010-1 CAT III 600V. EN 61326-1.

アクセサリー： Instruction manual, Test leads, Shoulder belt, Soft pouch, Batteries.

 

 

 

バイヤー通知
1.製品について
市場の変動、為替レートの変化、その他の要因のため、製品価格と製品属性は参考のみであり、具体的な製品要件は顧客の要件に従うものとし、価格は連絡された見積書に基づくものとします。本ウェブサイト上の製品価格はすべて取引価格とはみなされず、参考価格となります！
2.商標権について
当ウェブサイトに掲載されている会社名、商標、ロゴ、商品画像、商品説明、商品ブランド名、商標の著作権は、各ブランドに帰属します。
不必要な紛争を避けるため、バイヤーの指示をよくお読みください。

レビュー

レビューはまだありません。

“HOYTMETER Insulation & Multifunction Tester (OLED) 1155TMF-M” の口コミを投稿します

関連商品