HOYTMETER Тестер изоляции и многофункциональный тестер (OLED) 1155TMF-M

Бренд:HOYTMETER
Model:1155TMF-M
Если Вы хотите узнать о продукте, пожалуйста, свяжитесь с нами.
Пожалуйста, укажите марку, модель и количество для запроса.

Категория:

Описание

1155 TMF-M Insulation & Multifunction Tester (OLED Display)
Electrical / Installations / Telecoms / Maintenance / Analysis

Характеристики

● High Contrast OLED display.
● Designed for viewing in the dark, for mining industry.
● Auto-range microprocessor-controlled.
● Automatic voltmeter AC/DC at Start/Reset.
● Battery test at switch ON/Reset.
● Safety voltmeter before each test.
● Auto-discharge on all tests and all ranges.
● Leads auto-null key.
● Test auto-stop.
● Smart hold and stop on voltmeter AC/DC.
● Ener-Save.
● Continuity short circuit >220mA.
● Continuity open circuit voltage of 5Vdc.
● Nominal voltage @ 1mA on all insulation ranges.
● Polarization index (PI).
● Dielectric Absorption Ratio (DAR).
● BS 16 edition.

Special Functions

● DAR (Dielectric Absorption Ratio)
The Dielectric Absorption Ratio is the ratio of the insulation resistance measured at 1 minute divided by the insulation resistance measured at 30 seconds. Thirty seconds after starting a test (with Ener-SaveTM disabled), the tester will beep,indicating that the resistance value measured at 30 seconds has been saved. One minute after starting a test, the tester will beep again, indicating that the DAR result has been computed. The display format then changes to display the DAR result.
● PI (Polarization Index)
The Polarization Index is the ratio of the insulation resistance measured at 10 minutes divided by the insulation resistance measured at 1 minute. One minute after starting a test, the resistance value is saved and the DAR is displayed. The test then continues, and after 10 minutes (with Ener-SaveTM disabled), the tester will beep again, indicating that the PI result has been computed. The display format changes to display the PI result. The tester will AutoStop at 10 minutes.
● Voltmeter
When testing insulation resistance while there is a presence of voltage (whether ACV or DCV) on the measured object, conventional insulation testers are highly susceptible to damage. With this new line of insulation testers, it has the ability to switch to voltage detection mode without damaging the once it detects the presence of voltage. It will also display the voltage finding on the OLED display screen. With this new and unique function, it will allow the user to safely rule out the possibility of any presence of voltage on the measured object prior to measuring its insulation.
● MOV and Gas Arrester Testing
Most equipments and electrical installations are protected by MOVs and Gas arresters. They can test these devices to establish if the devices are still operating correctly or not. Energy conservation is featured on all these new Advanced Products.

Технические характеристики

  • Сопротивление изоляции
    – Test voltage: 50V; 100V; 125V; 250V; 500V; 1000V.
    – Measuring ranges: 0.1MΩ~400MΩ; 0.1MΩ~800MΩ; 0.1MΩ~1GΩ; 0.2M~2GΩ; 0.2M~4GΩ; 0.2M~8GΩ.
    – Accuracy: 0.1MΩ~4GΩ: ±3%rdg; 4GΩ~8GΩ: ±5%rdg.
    – Polarization index (PI).
    – Dielectric Absorption Ratio (DAR).
  • MOVs & GAS Voltage Result @ 1mA.
    – Test Voltage: 5~1020V.
    – Accuracy: ±3%rdg ±2dgt.
  • Continuity short circuit > 220mA
    – Range: 0.01~100Ω; 100~300Ω; 300~1999Ω.
    – Accuracy: ±1%rdg; ±1.5%rdg; ±2%rdg.
    – Auto-Null Up to 5Ω.
    – Buzzer Threshold Value Up to 3Ω.
  • Voltmeter (Autoranging)
    – Range: 0~700Vac; 0~950Vdc.
    – Accuracy: ±1.5% F.S.
    – Resolution: ±1V.
    – Auto-Hold.
  • Battery load current: Approx. 300mA.
  • LCD type: Large Type 2 × 16 Characters.
  • Auto-off: Approx. 5 minutes.
  • Fuse: Fast HBC 500mA 600V (5 × 20mm).
  • Operating temperature: 0°C~40°C not in full sun.
  • Storage temperature: -10°C~50°C.
  • Dimensions: 175(L) × 85(W) × 75(D)mm.
  • Weight (battery included): Approx. 655g.
  • Power source: 1.5V (AA) × 8 Alkaline batteries.
  • Safety Standard: EN 61010-1 CAT III 600V. EN 61326-1.

Аксессуары: Instruction manual, Test leads, Shoulder belt, Soft pouch, Batteries.

 

 

 

Уведомление покупателя
1. О продукте
В связи с колебаниями рынка, изменением валютных курсов и другими факторами цены на продукцию и ее характеристики носят исключительно справочный характер; конкретные требования к продукции зависят от пожеланий заказчика, а цена определяется на основе сообщенного предложения. Все цены на продукцию, указанные на данном сайте, не являются ценами сделок и носят исключительно справочный характер!
2. О товарном знаке Авторское право
Все названия компаний, торговые марки, логотипы, изображения продуктов, описания продуктов, названия торговых марок и авторские права на торговые марки, относящиеся к данному сайту, принадлежат соответствующим торговым маркам; Данный сайт предназначен только для удобства идентификации продуктов.
Во избежание ненужных споров внимательно ознакомьтесь с инструкциями покупателя.

Отзывы

Отзывов пока нет.

Будьте первым, кто оставил отзыв на “HOYTMETER Insulation & Multifunction Tester (OLED) 1155TMF-M”

Сопутствующие товары