COMPUR 监测器 泄漏检测气体探测器 Statox 560

描述

Statox 560 – Self-Test with Real-Gas

Detection of phosgene COCl₂, chlorine Cl₂, hydrocyanic acid HCN, carbon monoxide CO, hydrochloric acid HCl, ammonia NH₃ or hydrogen sulfide H₂S (others on request) at the highest level of security!

Functional safety with SIL2 is a measure of the extremely low probability of failure if necessary. In addition, a self-test with real gas guarantees that a malfunction – no matter how unlikely – does not go unnoticed with this gas warning device.

The maintenance requirement can also be determined with the self-test. This saves a lot of time for inspection rounds.

The Statox 560 is a state-of-the-art product in every respect:

• The new generation of sensors shines with high sensitivity, very fast response, low cross-sensitivities and plug-and-play technology.
• The gas generators produce the gas to be measured during the self-test. This ensures that the sensor works perfectly in terms of measurement technology.
• The output signals are a 4 – 20 mA analog signal plus 4 open collector outputs for A1, A2, maintenance request and system failure.
• The entire electronics are housed in an Ex d housing with a window. The self-test takes place automatically once a day at a programmable time. However, it can also be triggered by hand with a magnetic pen. The self-test can also be started from your control room. This can be done with a separate button or with the Statox 503 control module.
• With the supplied magnetic pen, parameters can be set and various information can be called up. Since the housing does not have to be opened, no fire permit is required.
• The sensor module contains the sensor, the generator cell and a micropump. It is designed in protection class Ex i. No fire permit is required for work on this module. The module can be completely removed and replaced with a new one. This structure reduces the work required in the field to an absolute minimum.

Technical Data:
Product name:	Statox 560 (Type 5377)
电源：	24 (16-30) VDC
耗电量：	max. 2.7 W (8.7 W for COCl2) at input voltage ≤ 26 VDC
工作温度：	-30 至 +60°C
压力：	700 to 1300 hPa
湿度	0 to 99% r. H., non condensing
申请：	II 2G
Explosion protection:	Ex d ib IIC T4 Gb (at Um = 30 VDC for all connections)
EC type examination certificate:	BVS 16 ATEX E 065 X
Protection class EN60529:	IP66 (gas intake IP54)
显示屏	2 x 16 signs, illuminated
住房	Cast aluminum epoxide varnish / stainless steel
连接：	10-core cable tail (1 m) or 7-pin eXLink plug
Open-Drain-outputs:	2 x alarm, 1 x system failure, 1 x maintenance request Characteristic values max. 30 VDC / 2.5 A
SF-Open-Drain- output:	In normal operation active (conductive)
Analog output:	0 mA in case of system failure 2 or 4 mA in the service mode, programmable 4 – 20 mA in the measuring mode 22 mA when full scale is exceeded max. burdon: 450 Ohm
EMC:	EN 61000-6-4:2007 + A1:2011 / EN 50270:2015 (type 2)
功能安全：	SIL 2 compliant according to IEC 61508:2010
Automatic self-test:	every 24 hours, time is selectable
重量	ca. 4800 g
尺寸（宽 x 高 x 深）：	121 x 294 x 138 mm

Selftest
Gas	Formula	Test Gas
Chlorine	Cl2	Cl2
Phosgene	COCl2	COCl2
Hydrogen sulfide	H2S	H2S
Hydrogen cyanide	HCN	HCN
Ammonia	NH3	H2S
Hydrogen chloride	HCl	H2S

 

 

 

 

买家须知
1.关于产品
由于市场波动、汇率变动等因素，产品价格及产品属性仅供参考；具体产品要求以客户要求为准，价格以沟通报价为准。本网站所有产品价格均不作为交易价格，仅供参考！
2.关于商标 版权
与本网站相关的所有公司名称、商标、徽标、产品图片、产品说明、产品品牌名称和商标版权均属于相应品牌；本网站仅为方便识别产品而设计。
请仔细阅读买方说明，以避免不必要的纠纷。