HI-Q 电池驱动空气采样器 CF-5624-WR - 24VDC

The CF-5624-WR is optimized to use the minimum amount of electrical power in order to decrease the cost of implementing a solar powered air sampling system. The CF-5624-WR low power requirements also allow extended run times when used with battery only power. The 24 VDC brushless blower has a maximum amp draw of 1.5 Amps for a maximum power requirement of 36 Watts. The CF-5624-WR is designed for continuous use. The white powder coated aluminum weather proof enclosure is designed to minimize solar heat gain through the use of a dual wall construction that also serves to diffuse the blower exhaust through the external louvers to prevent contaminating the sampler environment with dust from the surrounding ground. The inlet features a 4” filter holder that accepts the weather proof, omni-directional inlet. 47mm and 2” filter holders can be installed under the inlet with the use of the WRA-4CF adapter and the applicable CF series filter holder. The digital display shows instantaneous flow rate, total volume sampled and elapsed time. The built in flow controller provides automatic set point flow control as well as built-in programmable timers for sampler control and on-board data logging. Custom CF-5624-WR samplers can be provided with internal batteries and chargers.

买家须知

1.关于产品

由于市场波动、汇率变动等因素，产品价格及产品属性仅供参考；具体产品要求以客户要求为准，价格以沟通报价为准。本网站所有产品价格不作为交易价格，仅供参考！

2.关于商标版权

与本网站相关的所有公司名称、商标、标识、产品图片、产品说明、产品品牌名称等，以及商标版权等所有知识产权均归相应品牌所有；本网站仅为方便用户识别产品而设。
请仔细阅读买方说明，以避免不必要的纠纷。