描述
1155 TMF-M Insulation & Multifunction Tester (OLED Display)
Electrical / Installations / Telecoms / Maintenance / Analysis
特点
● High Contrast OLED display.
● Designed for viewing in the dark, for mining industry.
● Auto-range microprocessor-controlled.
● Automatic voltmeter AC/DC at Start/Reset.
● Battery test at switch ON/Reset.
● Safety voltmeter before each test.
● Auto-discharge on all tests and all ranges.
● Leads auto-null key.
● Test auto-stop.
● Smart hold and stop on voltmeter AC/DC.
● Ener-Save.
● Continuity short circuit >220mA.
● Continuity open circuit voltage of 5Vdc.
● Nominal voltage @ 1mA on all insulation ranges.
● Polarization index (PI).
● Dielectric Absorption Ratio (DAR).
● BS 16 edition.
Special Functions
● DAR (Dielectric Absorption Ratio)
The Dielectric Absorption Ratio is the ratio of the insulation resistance measured at 1 minute divided by the insulation resistance measured at 30 seconds. Thirty seconds after starting a test (with Ener-SaveTM disabled), the tester will beep,indicating that the resistance value measured at 30 seconds has been saved. One minute after starting a test, the tester will beep again, indicating that the DAR result has been computed. The display format then changes to display the DAR result.
● PI (Polarization Index)
The Polarization Index is the ratio of the insulation resistance measured at 10 minutes divided by the insulation resistance measured at 1 minute. One minute after starting a test, the resistance value is saved and the DAR is displayed. The test then continues, and after 10 minutes (with Ener-SaveTM disabled), the tester will beep again, indicating that the PI result has been computed. The display format changes to display the PI result. The tester will AutoStop at 10 minutes.
● Voltmeter
When testing insulation resistance while there is a presence of voltage (whether ACV or DCV) on the measured object, conventional insulation testers are highly susceptible to damage. With this new line of insulation testers, it has the ability to switch to voltage detection mode without damaging the once it detects the presence of voltage. It will also display the voltage finding on the OLED display screen. With this new and unique function, it will allow the user to safely rule out the possibility of any presence of voltage on the measured object prior to measuring its insulation.
● MOV and Gas Arrester Testing
Most equipments and electrical installations are protected by MOVs and Gas arresters. They can test these devices to establish if the devices are still operating correctly or not. Energy conservation is featured on all these new Advanced Products.
规格
- 绝缘阻抗
– Test voltage: 50V; 100V; 125V; 250V; 500V; 1000V.
– Measuring ranges: 0.1MΩ~400MΩ; 0.1MΩ~800MΩ; 0.1MΩ~1GΩ; 0.2M~2GΩ; 0.2M~4GΩ; 0.2M~8GΩ.
– Accuracy: 0.1MΩ~4GΩ: ±3%rdg; 4GΩ~8GΩ: ±5%rdg.
– Polarization index (PI).
– Dielectric Absorption Ratio (DAR). - MOVs & GAS Voltage Result @ 1mA.
– Test Voltage: 5~1020V.
– Accuracy: ±3%rdg ±2dgt. - Continuity short circuit > 220mA
– Range: 0.01~100Ω; 100~300Ω; 300~1999Ω.
– Accuracy: ±1%rdg; ±1.5%rdg; ±2%rdg.
– Auto-Null Up to 5Ω.
– Buzzer Threshold Value Up to 3Ω. - Voltmeter (Autoranging)
– Range: 0~700Vac; 0~950Vdc.
– Accuracy: ±1.5% F.S.
– Resolution: ±1V.
– Auto-Hold. - Battery load current: Approx. 300mA.
- LCD type: Large Type 2 × 16 Characters.
- Auto-off: Approx. 5 minutes.
- Fuse: Fast HBC 500mA 600V (5 × 20mm).
- Operating temperature: 0°C~40°C not in full sun.
- Storage temperature: -10°C~50°C.
- Dimensions: 175(L) × 85(W) × 75(D)mm.
- Weight (battery included): Approx. 655g.
- Power source: 1.5V (AA) × 8 Alkaline batteries.
- Safety Standard: EN 61010-1 CAT III 600V. EN 61326-1.
配件 Instruction manual, Test leads, Shoulder belt, Soft pouch, Batteries.
买家须知
1.关于产品
由于市场波动、汇率变动等因素,产品价格及产品属性仅供参考;具体产品要求以客户要求为准,价格以沟通报价为准。本网站所有产品价格均不作为交易价格,仅供参考!
2.关于商标 版权
与本网站相关的所有公司名称、商标、徽标、产品图片、产品说明、产品品牌名称和商标版权均属于相应品牌;本网站仅为方便识别产品而设计。
请仔细阅读买方说明,以避免不必要的纠纷。





评价
目前还没有评论