DIETERT Hot Shell Tensile Tester NO. 365

model:NO. 365
If you want to learn about the product, please contact us.
Please provide the brand, model, and quantity for inquiry.



This tester is a complete unit for curing and testing shell mixes for tensile strength at curing temperature. The test procedure is simple and rapid.

Recommended for laboratory research work. Tensile tests at curing temperature are important when the mix contains thermoplastic materials. These materials impart tensile strength to the cold shell but not to the shell at curing temperature. For a proper understanding of a shell mix, strength at room temperature should be compared with strength at curing temperature.

The tester conforms to AFS Standards. A spill pan, knock-out pin, combination hopper and strike-off, and an outlet for the No. 366 Timer Accessory are included. No. 365-80 blow cartridge is available for those who prefer to blow the specimen.

The tester forms, cures and breaks 1/4-in. (6.35mm) thick tensile specimens at temperatures from 150 to 600° F (65 to 315° C) with strengths up to 800 psi (56.24 kg/cm2).

Metric scale available upon request.


Dimensions (W x D x H):…28 x 10 x 12 in. (711 x 254 x 305mm)

Net weight:…..65 lb. (30 kg)


Model 1…..115V, 50 Hz, 1-phase

Model 2…..115V, 60 Hz, 1-phase

Model 3…..Model 1 with transformer for 230V, 50 Hz, 1-phase

Model 4…..Model 2 with transformer for 230V, 60 Hz, 1-phase

Accessories for No. 635 Hot Shell Tensile Tester:

No. 365-80 Blow Cartridge

No. 365-105 Calibration Fixture

No. 366 Timer Accessory

Buyer Notice

1. About the product

Due to market fluctuations, exchange rate changes, and other factors, product prices and product attributes are for reference only; The specific product requirements are subject to customer requirements, and the prices are subject to communication and quotation. All product prices on this website are not considered transaction prices and are for reference only!

2. Regarding trademark copyright

All company names, trademarks, logos, product images, product descriptions, product brand names, etc. related to this website, and all intellectual property rights such as trademark copyright belong to the corresponding brand; This website is only for the convenience of product identification.
Please carefully read the buyer’s instructions to avoid unnecessary disputes.


There are no reviews yet.

Be the first to review “DIETERT Hot Shell Tensile Tester NO. 365”